The GParted program, which is installed in Ubuntu by default, will help you restore the USB flash drive. In fact, only one partition is mounted on the system, you can see an example in the figure below. Restoring the size of a bootable USB flash drive (disk)Īfter using a USB flash drive, you will be surprised that 7Mb or 2Mb is available to you to work on a USB disk. , and if your flash drive is displayed in the system as sdb1, then this is a partition, and you need to specify the sdb device.
Met for a long time linux command dd, sometimes it became necessary to use it, but never to create a bootable USB drive. Now you need a USB flash drive with Windows, after 5 minutes with Acronis, and then with CloneZilla.Įarlier, to create bootable flash drives, I used the program, but sometimes there were some "jambs", the boot menu that Unetbootin creates, freezes, then the flash drive is formatted in NTFS, then something is wrong with the partitions of the flash drive. If you have any questions, then ask them on our.Ĭompact disks have outlived theirs, it is much more convenient to use USB disks (flash drives) for recording installation images of operating systems, resuscitators, live USB.
The resulting installation flash drive will be able to run not only on your computer, but also on the computers of your friends, and you can introduce them to our wonderful operating system. Click on the "ok" button and wait for the end of the recording.Īs you can see, it is very easy to write Linux Mint to a USB flash drive, and in order to boot from it, you need to set the boot priority from removable media in the BIOS. Specify the path to the Linux Mint image on your computer and select the medium to which this image will be recorded. The following window will appear in front of you: Connect the USB flash drive to your computer, delete all information from it and run the program.
UNetbootin exists for both Windows and Linux Mint. Creating a bootable Linux Mint USB stick with UNetbootin Wait until the image is written to the USB flash drive and close the program window. The rest of the program settings can be left by default and click on the "start" button. The following window will appear in front of you:įirst, specify the path to the iso image on your hard drive, and then select the "GPT for UEFI Computers" partition scheme. Creating a bootable Linux Mint USB stick with RufusĬonnect the USB flash drive to your computer, delete all information from it and run the Rufus program. Let's look at the nuances of working with each of the programs. If you have older hardware, the UNetbootin program will suffice.
If you have new computers with UEFI, then you need to download the Rufus program.
Here you need to build on the ultimate goals and where you will install the system. If you have Windows 7, 8 or 10 installed on your computer, then you need to download special program. Creating a bootable USB flash drive from a Windows system First, you need to go from our website, and then follow the simple sequence of actions that is described in this article. Configuring Linux Mint on a USB flash driveīootable USB stick with Linux Mint may be needed to install the system on a computer or to get acquainted with it in Live mode.
Bootable ubuntu flash drive: burning an iso image, installing UltraIso.